: Power off the satellite receiver using the physical rear switch or by unplugging it. Connection
A: The original ALIUP.exe is Windows‑only. However, similar open‑source tools such as librs232 and fw_update can be compiled on Linux. For the same workflow, you might also try the BAS‑IP “Remote Upgrade Tool,” which is cross‑platform (Windows, macOS, Linux).
Q: Can I use the ALiRS232 Upgrade Tool with multiple devices? A: Yes, the ALiRS232 Upgrade Tool V1.20 is designed to work with a range of ALiRS232 devices. However, ensure that the device is compatible with the tool and that the correct device driver is installed.
Open the Windows (Press Win + X and select Device Manager). Expand the Ports (COM & LPT) section.
A: If your PC has a built‑in COM port, no extra driver is needed. If you use a USB‑to‑RS232 converter, you must install the correct driver for that converter chip (Prolific, FTDI, CH340, etc.). alirs232upgradetoolv120 downloader full updated
: Uses a standard RS232 (DB9) null-modem cable for a stable, low-level connection between your PC and the receiver. Step-by-Step Usage Guide
| Feature | Description | |---------|-------------| | | Uses standard RS232 protocol (115200 baud, Even parity, 8 data bits, 1 stop bit) to talk directly to the Ali chip’s bootloader. | | Firmware upload | Loads a new firmware image from a .bin or .abs file into the device’s Flash memory. | | COM port detection | Automatically lists available COM ports; you can manually choose the port that matches your USB‑to‑serial adapter or built‑in serial port. | | Open / Start workflow | Simple two‑step process: click Open to load the firmware file, then click Start to begin sending the upgrade data to the device. | | Status feedback | Displays progress messages such as “Sending upgrade request to box…” and “Success” when complete. | | Auto‑reboot option | Some versions include an “Auto Reboot” checkbox that restarts the device after a successful upgrade. | | Cross‑Windows compatibility | Works on Windows XP, Windows 7 (x86), and newer Windows versions with appropriate driver support. |
(such as the M3329 series). It serves as a vital bridge between a PC and a Set-Top Box (STB) when standard USB updates fail or the device becomes "bricked" (unresponsive). 🛠️ Key Functions & Features Firmware Flashing
Before initiating the serial upgrade process, you must gather the correct physical components. Serial flashing requires specific hardware that is rarely included with modern consumer electronics. 1. The Physical Interface : Power off the satellite receiver using the
: Easily upgrade your receiver to the latest software version to unlock new features or improve stability.
The software status bar should display a "Connection OK" message and begin initialization. If it times out, turn off the receiver and try again.
Lower the baud rate in the tool settings from 115200 down to 57600 or 9600 . Keep the serial cable length under 1.5 meters to prevent data corruption. Flashing stops at 0% or stays stuck on "Check Serial Port"
: Press the "Start" or "Next" button in the software, then immediately power on the satellite receiver. Completion For the same workflow, you might also try
Defective USB-to-Serial converter driver or unstable hardware connection.
: Works with various satellite receiver models using the ALI chipset, such as the M3329C. Lightweight : The tool is approximately 380 KB in size. Where to Find it
: Download and extract the ALIRS232 Upgrade Tool v1.2.0 folder. Step-by-Step Installation & Update Process
Follow these steps carefully to ensure a successful firmware flash: 1. Connection