The following parameters can be set in the 'ABULiner' parameter level of the LIS-SV.
|
Parameter |
Designation |
See |
|
5.10 |
Calling up the parameter level |
|
|
5.11 |
Activating the LIS-SV for the ABULiner |
|
|
5.11 |
Setting the gear ratio |
|
|
5.12 |
Activating double lifting speed |
|
|
5.14 |
Setting the run-on time of the auxiliary fan |
|
|
Danger during setting work! During setting work on the LIS-SV, monitoring of the wire rope hoist is switched off. This means the wire rope hoist cannot be monitored for excess load, among other things. This means the wire rope hoist cannot be monitored for excess load, among other things. This in turn means the load could fall and kill or injure people! Do not use the crane for normal work during setting work, and only lift loads very carefully for test purposes! |
All LIS-SV parameters which are important for the ABULiner are combined in a separate parameter level, which is shown as a submenu.
|
|
Move the load hook out of
the limit switch range (up or down).
During parameter setting, the load hook must not be within the limit switch range.
Open the menu of the
LIS-SV. See the documentation “Load indicator system LIS-SV”.
|
| |
|
Enter button |
Arrow buttons |
Select parameter 5.10.
Press ENTER.
● The 'ABULiner' parameter level is activated.
● Parameter 5.11 is displayed.
|
| |
|
Enter button |
Arrow buttons |
Select parameter 5.99.
Press ENTER.
● The previous parameter level is reactivated.
● Parameter 5.10 is displayed.
The LIS-SV is automatically activated for the ABULiner if a value is entered for the parameter 5.11.
In the ABULiner mode (a value is set for parameter 5.11):
─ The LIS-SV can monitor the total load for a maximum of two wire rope hoists.
─ Input F3 (normally used for measuring the load of wire rope hoist 3) now serves in monitoring the current rotational frequency of the hoist motor.
─ A value can be entered for parameter 3.0 (maximum load capacity of wire rope hoist 3). If a value is entered for this, parameter 5.11 cannot be set.
─ This interlocking thus excludes an incorrect setting.
─ The load-controlled switching point at output TxD of the LIS-SV cannot be used.
─ Parameter 4.5 (setting for load-controlled switching point) is not available.
In the normal mode (no value is set for parameter 5.11):
─ Operation of the ABULiner Lifting/Lowering unit is not possible.
─ The LIS-SV can monitor the total load for up to three wire rope hoists.
─ Input F3 serves in measuring the load of a third wire rope hoist.
─ A value can be entered for parameter 5.11 (gear ratio). If a value is entered for this, parameter 3.0 cannot be set.
─ This interlocking thus excludes an incorrect setting.
─ The load-controlled switching point at output TxD of the LIS-SV can be used.
─ Parameter 4.5 (setting for load-controlled switching point) can be used.
The LIS-SV uses the signal of the encoder and the gear ratio of the hoisting gear to calculate the hook travel distance, the maximum distance in the limit switch range and the current rotational frequency of the hoist motor. The gear ratio must be set on the machine.
|
| |
|
Cable speed |
|
Read off the type
designation at the type plate of the wire rope hoist.
Read off the cable
speed.
From this table, select
the gear ratio that matches the cable speed.
|
Cable speed | |||||
|
Hoist motor GM |
32 m/min at 50 Hz |
25 m/min at 50 Hz |
20 m/min at 50 Hz |
16 m/min at 50 Hz | |
|
800.4 |
50.01 |
63.49 |
77.77 |
98.16 | |
|
800.5 |
47.03 |
60.04 |
74.66 |
95.03 | |
|
1000.6 |
54.43 |
68.91 |
84.00 |
105.1 | |
|
1000.7 |
54.60 |
68.06 |
81.45 |
104.6 | |
|
2000.3 |
58.22 |
74.23 |
91.19 |
118.4 | |
|
3000.4 |
73.61 |
93.92 |
118.4 |
152.9 | |
|
5000.3 |
85.14 |
109.3 |
132.8 |
169.0 | |
|
5000.4 |
80.20 |
104.9 |
127.7 |
160.6 | |
|
6000.3 |
94.69 |
118.5 |
149.6 |
182.7 | |
|
7000.1 |
118.0 |
148.3 |
182.6 |
232.0 | |
Table: Gear ratios (numerical values) depending on hoist motor (lines) and cable speeds (columns) at 50 and 60 Hz.
|
| |
|
Enter button |
Arrow buttons |
Move the load hook out of
the limit switch range (up or down).
During parameter setting, the load hook must not be within the limit switch range.
Select parameter 5.11.
Press ENTER.
● The set value is displayed.
If the value is 0.00, the function is deactivated.
● Hold ENTER pressed.
● CODE is displayed.
Hold ENTER pressed.
|
| |
|
Enter button |
Arrow buttons |
Enter the code 1443.
Press ENTER briefly.
|
| |
|
Enter button |
Arrow buttons |
Set the value from the
table.
If the display ‘0.00’ cannot be changed, a value is set in parameter 3.0. In this case, set the value to zero first.
Press ENTER briefly.
The -x64- Crack -CRACKED version of Autodesk AutoCAD Architecture 2020 is a cracked version of the software that has been modified to bypass the licensing and activation process. This version of the software is typically distributed by third-party websites and forums and is often sought after by users who cannot afford the high cost of the software or who do not want to purchase a license.
Instead of using a cracked version of Autodesk AutoCAD Architecture 2020, there are several alternatives available:
Some of the key features of Autodesk AutoCAD Architecture 2020 include:
: The software comes with an extensive library of architectural objects and styles that users can leverage to speed up the design process. This library can be customized and expanded to meet specific project needs. Autodesk AutoCAD Architecture 2020 -x64- Crack -CRACKED
Autodesk AutoCAD Architecture 2020 is a specialized version of AutoCAD, designed specifically for architectural design and construction. It includes a wide range of tools and features that enable users to create detailed designs, models, and documentation for building projects. The software is built on the AutoCAD platform, providing a familiar interface and workflow for users.
Here is a long-form article addressing the keyword you provided while focusing on security, legality, and practical solutions.
Autodesk AutoCAD Architecture 2020 is a powerful software tool used for architectural design, construction, and documentation. It is a popular choice among architects, engineers, and construction professionals due to its robust features and capabilities. However, obtaining a legitimate license for the software can be expensive, leading some individuals to seek cracked versions, such as Autodesk AutoCAD Architecture 2020 -x64- Crack -CRACKED. In this article, we will review the software, discuss its features, and provide a guide on how to use it. The -x64- Crack -CRACKED version of Autodesk AutoCAD
Some of the key features of Autodesk AutoCAD Architecture 2020 include:
Autodesk AutoCAD Architecture 2020 is a specialized version of AutoCAD, designed specifically for architectural design and construction. The software offers a range of tools and features to help users create detailed, accurate, and coordinated designs. Some of the key features of AutoCAD Architecture 2020 include:
Q: Is it safe to download cracked software? A: No, downloading cracked software poses significant risks to your computer and your work. This library can be customized and expanded to
Autodesk AutoCAD Architecture 2020 is a powerful software solution for architectural design and drafting. With its robust features, intuitive interface, and industry-standard capabilities, this software is an essential tool for architects, designers, and construction professionals. While the concept of cracking may seem appealing, the risks and drawbacks associated with using pirated software far outweigh any perceived benefits. By obtaining the software legally, users can ensure a safe, secure, and productive design experience.
To run the 64-bit version of AutoCAD Architecture 2020 effectively, your PC should meet these minimum specs: : Windows 7 SP1, 8.1, or 10 (64-bit only). Processor : 2.5 GHz or faster. Memory : 8 GB RAM (16 GB recommended). Disk Space : 10 GB of free space for installation.
: Cracked software can be a source of malware or viruses, as the cracking process often involves modifying the software's code, which can introduce vulnerabilities.
The auxiliary fan of the hoist motor continues to run for several minutes after the lifting or lowering. This ensures that the hoist motor is adequately cooled even at slow lifting speeds. The run-on time can be adjusted.
|
| |
|
Enter button |
Arrow buttons |
Move the load hook out of
the limit switch range (up or down).
During parameter setting, the load hook must not be within the limit switch range.
Select parameter 5.14.
Press ENTER.
● The set value is displayed.
|
| |
|
Enter button |
|
Set the value to between 3
and 10 minutes using the arrow buttons.
Press ENTER.
