Canon Service Mode Tool Version 1.050 [hot]

Compatibility and requirements

If you decide to use an unofficial tool, consider looking for (e.g., V2000, V3400, V3600) that support a wider range of printer models and may be more stable. These newer versions can be found on the same third‑party websites, but all the same security warnings apply.

The tool's content and interface typically include the following features: Waste Ink Counter Reset

The green LED light will flash and then stay steady. The computer may detect a new device. Phase 2: Run the Canon Service Tool 1.050 Service_Mode_Tool_v1.050.exe . Canon service mode tool version 1.050

Click the button at the top to print a diagnostic sheet and verify that the Ink=00.0% value has been updated successfully.

Having the tool is not enough; you must place your printer into first. The tool will not function if the printer is in standard operating mode. Steps to Enter Service Mode: Turn off the printer but keep it connected to power. Press and hold the Stop (Triangle in a circle) button .

To ensure the reset worked:

: Release the Stop/Reset button while continuing to hold Power.

typically recommends contacting an authorized service center for "Ink Absorber Full" issues rather than using third-party tools. Canon Knowledge Base Are you trying to clear a specific error code

Disclaimer: This guide is for informational purposes only. Unauthorized service mode access may void your warranty and violate Canon’s terms of use. Proceed at your own risk. Compatibility and requirements If you decide to use

The printer will whir for a moment and may feed a blank sheet of paper to print a line of confirmation code (e.g., counter=0 ).

: Allows for firmware updates and testing of internal printer functions like the EEPROM.

effectively reviving printers that would otherwise stop working due to a "full" ink pad error. www.facebook.com Core Capabilities Ink Counter Reset The computer may detect a new device