For standard driver updates and software that won't void your warranty, always use the Official Canon Support Site exact button sequence for a specific Canon printer model to enter service mode?

Using an incompatible or modified ("cracked") service tool often corrupts the printer's main board, throwing an unrecoverable Error Code 006 .

[Main Tab] └── [Clear Ink Counter] └── Absorber: Main ──> Click [Set]

To use this tool effectively, you must first place your printer into ; otherwise, the software will not communicate with the device. Step 1: Entering Service Mode

The power LED will blink for a few moments and then settle into a . Your computer may play a connection chime and detect new hardware.

Turn off your printer using its physical power button (it may take a few seconds to shut down completely), then turn it back on normally. Your printer is successfully reset. Troubleshooting Common Error Codes Error Code Printer not in Service Mode

Windows 7, Windows 8, Windows 10, or Windows 11 (32-bit or 64-bit). Note: macOS is not supported.

Have you already attempted to put the device into ? Share public link

Resets the main and platen ink counter (5B00/1700 errors). Printer Diagnostic: Checks EEPROM information.

for the tool to detect it. While steps vary slightly by model, the standard procedure is:

Press and (triangle inside a circle).

To use the ST V5510, you must first put your Canon printer into Service Mode: the printer (keep it plugged in). Press and hold the Stop/Reset button. While holding Stop/Reset, press and hold the Power button. Release the Stop/Reset button (while still holding Power).

Right-click the file and select or use a utility like WinRAR / 7-Zip.