Automatically reallocates system resources (PCI compaction) to make room for the eGPU .
Reboot your PC and select the "DIY eGPU Setup" entry from the boot menu.
DIY eGPU Setup 1.35 (formerly Setup 1.x) is a specialized, menu-driven software tool developed by
: Run setup-disk-image.bat as an administrator to create a bootable environment on your hard drive. Configure in Boot Menu : diy egpu setup 135 download free patched
Be cautious of links claiming to offer "free patched" or cracked versions. These are unofficial and often contain malware or are outdated, which can cause boot errors or system instability on sensitive hardware like eGPUs . Key Features of Setup 1.35
The laptop cannot power a desktop GPU. You need a dedicated ATX or Dell DA-2 power supply to feed the graphics card.
: Allows users to manually set PCIe speeds (e.g., Gen1 or Gen2) to ensure stability. dGPU Disabling Configure in Boot Menu : Be cautious of
Shut down the laptop. Plug the eGPU cable into the laptop interface port and turn on the eGPU power supply.
Developed by tech enthusiast Nando4, this is a widely recognized legacy boot-loader utility. It acts as a pre-boot environment, allowing users to manually compact PCIe allocations, turn off unneeded internal components (like a discrete internal GPU), and force the laptop to recognize the external card properly.
If your system boots into Windows, check the under Display Adapters . You need a dedicated ATX or Dell DA-2
The same power supplies used in desktop computers. They are affordable and offer plenty of wattage.
An increasingly popular open-source interface that offers higher bandwidth than Thunderbolt by eliminating Thunderbolt protocol overhead, connecting directly via PCIe.
With all the necessary components in hand, I began the assembly process. The eGPU enclosure was straightforward to assemble, but connecting the graphics card to the enclosure proved to be a challenge. After several attempts, I finally managed to secure the card in place.
Enable or "Large Memory Support" if the option exists. This natively resolves Error 12. Step 3: Software and Driver Installation
This is , and the cracked versions often contain malware. The legitimate successor is EGPU-Switcher (free, open source) or Error 43 fix script (free, no crack needed).