Eberle Instat 6 User Manual English -

Set the time for the first program event (P1) and the desired temperature. Repeat for subsequent events (P2-P6). Exit by pressing the button. 6. Functions and Modes 6.1 Manual Mode

7-day or 5/2-day programming options [1].

The thermostat is successfully sending a wireless or wired "on" signal, but the boiler or zone valve is locked out, turned off, or malfunctioning.

Press the or Run button to save and exit to the main screen. 5. Advanced Modes and Manual Overrides Temporary Temperature Override eberle instat 6 user manual english

Siemens Industry Online Support (since Siemens acquired Eberle).

Reset the device. If the error persists, the unit requires replacement. How to Hard Reset the Thermostat

Programming the Instat 6 involves setting three "events" per day (Morning, Day, Evening, Night). The factory program (German standard) may not suit your lifestyle. Here is the exact sequence from the . Set the time for the first program event

: Offers five pre-set programs to quickly start temperature regulation. Operating Modes : Includes multiple functional modes:

Choose an internal wall away from direct sunlight, drafty doors, windows, and heat-emitting appliances. Ensure free air circulation around the unit. Wiring Diagram

| Button | Symbol | Function | |--------|--------|----------| | 1 | Up arrow (▲) | Increase temperature / navigate menu up | | 2 | Down arrow (▼) | Decrease temperature / navigate menu down | | 3 | Clock (🕘) | Enter programming / time settings / confirm | | 4 | Auto/Manual (👤) | Switch between Auto (schedule) and Manual (permanent hold) | | 5 | On/Off (⏻) | Power / standby (frost protection remains active) | Press the or Run button to save and exit to the main screen

By following this guide, you can now source the original PDF, navigate the hidden installer menus, and troubleshoot errors without calling a technician. Remember: If your Instat 6 is over 15 years old and the display is fading, the manual cannot fix hardware aging. In that case, use the manual to extract your settings and migrate them to a newer Siemens RDD100 or RDE100 series.

: Supports a maximum current of up to 8A (for 6-2W) or 10A (for 6-3WS).