Firstchip Fc1178bc Firmware Verified Jun 2026
Look for the . It should explicitly say FC1178BC .
By downloading a verified FirstChip FC1178BC MP Tool package and matching it correctly to your hardware details, you can reliably bypass Windows formatting errors and give your broken USB drive a brand-new lease on life.
If the verification fails, the controller enters a "ROM code mode" or "pre-format mode." The device may be detected as "FirstChip" with a capacity of 0MB or 16MB. This is where the search for begins.
Download and launch or Flash Drive Information Extractor (Innostor) . firstchip fc1178bc firmware verified
A "100% Succeed" status in the MPTool verifies that the firmware is correctly written and the hardware is responding as expected. Key Considerations
Connect the drive directly to a motherboard USB port. Do not use external USB hubs.
While it offers cost-effective storage control, its firmware structure is highly susceptible to corruption from improper ejections, power surges, or bad NAND flash memory blocks. When the firmware corrupts, the operating system can no longer communicate with the memory chips, locking the drive down into a read-only or unrecognized state. Prerequisites Before Flashing Look for the
Do not interrupt this process. The tool will show a green pass (if successful) or red fail indicator, along with "100%" or similar completion messages.
The FirstChip FC1178BC is a highly popular, budget-friendly USB 2.0/3.0 flash memory controller. It is commonly found in generic USB drives, promotional flash drives, and counterfeit high-capacity storage sticks sold online. Why Firmware Corrupts
. Recent versions (2020–2024) include updated flash support lists. Configuration: FirstChip_MpTool.exe and ensure the matches the results from ChipGenius. "Scan Mode" If the verification fails, the controller enters a
Once the tool shows 100% success, your drive should reappear in Windows with its original factory capacity. Why Does This Work?
Click on the or Bin button (you may need to leave the password blank or try 888888 if prompted).
Watch the progress bar. The software will scan the blocks, erase the old firmware, partition the drive, and write the verified FC1178BC firmware code.
Flashing firmware destroys all existing data on the USB drive. Ensure you have accepted this loss before proceeding. Step 1: Environment Setup
is a popular USB 2.0 mass storage controller manufactured by . It is widely used in budget flash drives, including those with SanDisk, Intel, and Toshiba NAND memory. Common symptoms of firmware failure on this chip include:
