ipmitool -H <iRMC_IP> -U admin -P admin chassis status
The device has either been changed from defaults, or the iRMC is locked due to too many failed attempts (security feature). In that case, see Part 6 (Recovery).
For smaller servers that lack a System ID Card, a label with the default password is attached directly to the top cover of the chassis Important Security & Troubleshooting Tips Case Sensitivity: All iRMC passwords are case-sensitive Ambiguous Characters:
Run the following command to set the password for the "admin" user (user ID 2 is typically the default admin): ipmitool user set password 2 new_password fujitsu irmc default password
If you are setting up a modern Fujitsu server, you will not be able to log in with "admin/admin." You must locate the physical label attached to the server chassis.
, refer to: Fujitsu "iRMC S4/S5 User Guide" – Chapter: "Initial Configuration & Security"
: ipmitool user set password 2 'NewSecretPassword123!' ipmitool -H <iRMC_IP> -U admin -P admin chassis
ssh admin@<iRMC_IP_Address> # Once logged in: configure user admin password <new_password>
: Integrate iRMC with Active Directory (AD) or LDAP. This allows you to manage user permissions centrally and enforce corporate password policies.
If the default admin/admin doesn't work and you don't have the System ID card, you can reset the password without a full server reboot using ipmitool on the host operating system. Method 1: Using Linux/ESXi (No Reboot Required) , refer to: Fujitsu "iRMC S4/S5 User Guide"
If the default admin/admin is active, an attacker can achieve full "BMC-level" compromise.
If you are setting up a newer PRIMERGY server, the unique string is printed directly on a physical tag attached to the machine.
: Each server is shipped with a unique password based on the serial number.
ipmitool -H <iRMC_IP> -U admin -P admin chassis status
The device has either been changed from defaults, or the iRMC is locked due to too many failed attempts (security feature). In that case, see Part 6 (Recovery).
For smaller servers that lack a System ID Card, a label with the default password is attached directly to the top cover of the chassis Important Security & Troubleshooting Tips Case Sensitivity: All iRMC passwords are case-sensitive Ambiguous Characters:
Run the following command to set the password for the "admin" user (user ID 2 is typically the default admin): ipmitool user set password 2 new_password
If you are setting up a modern Fujitsu server, you will not be able to log in with "admin/admin." You must locate the physical label attached to the server chassis.
, refer to: Fujitsu "iRMC S4/S5 User Guide" – Chapter: "Initial Configuration & Security"
: ipmitool user set password 2 'NewSecretPassword123!'
ssh admin@<iRMC_IP_Address> # Once logged in: configure user admin password <new_password>
: Integrate iRMC with Active Directory (AD) or LDAP. This allows you to manage user permissions centrally and enforce corporate password policies.
If the default admin/admin doesn't work and you don't have the System ID card, you can reset the password without a full server reboot using ipmitool on the host operating system. Method 1: Using Linux/ESXi (No Reboot Required)
If the default admin/admin is active, an attacker can achieve full "BMC-level" compromise.
If you are setting up a newer PRIMERGY server, the unique string is printed directly on a physical tag attached to the machine.
: Each server is shipped with a unique password based on the serial number.