Select the target satellite (e.g., Nilesat, Hotbird, or Badr, depending on your region).
Once your Humax F1 Mini reboots successfully, it is highly recommended to perform a ( Menu > Installation > Factory Default ). This clears out any conflicting cached data from the old software version. Note that this will wipe your channel list, so you will need to run an automatic channel scan to re-populate your television and radio guides.
Go to Menu > Settings > System Information to note your current firmware version. humax f1 mini software update
| Issue | Possible Cause | Troubleshooting Steps | | :--- | :--- | :--- | | Update fails or gets stuck at 99% | Corrupted firmware file, unstable power supply, or USB drive incompatibility | Re-download the firmware file, ensure your USB drive is properly formatted to FAT32, and try a different USB port on the receiver. Also, ensure your device has a stable power source. | | Receiver stuck in a boot loop | The update process was interrupted, or the firmware file was incorrect | Use the "Forced Factory Reset" method detailed above to re-flash the original factory firmware. If the issue persists, contact Humax support. | | Remote control not responding | The update may have changed some settings, or the remote's batteries are low | Check the batteries. If the issue persists, you may need to re-pair the remote control. Sometimes, resetting the receiver to factory defaults can resolve this. | | "No channels" after update | The update may have cleared your channel list | Perform a new channel scan. Use the auto antenna search feature on your Humax F1 Mini for an easy setup. | | USB drive not recognized | USB drive is not formatted to FAT32, or the firmware file is not named correctly | Reformat the USB drive to FAT32 and ensure the firmware file is placed directly in the root directory of the drive (not inside any folders). | | Can't update via OTA | Poor internet connection or satellite signal | Check your network settings and ensure the satellite dish is properly aligned. You may need to switch to the USB update method. |
The is a compact, high-definition digital satellite receiver designed for free-to-air (FTA) channels, featuring support for MPEG-4 HD and SD content. Keeping your device updated ensures access to new features, such as the recently added channel import/export functions, and maintains compatibility with evolving satellite signal standards. How to Perform a Humax F1 Mini Software Update Select the target satellite (e
Flashed firmware changes the core operating instructions of your device. Standard safety rules apply during this process:
Once you have this number, you can compare it with the latest version available on the official Humax support website. Note that this will wipe your channel list,
Reformat USB to FAT32. Place the file in the root directory. Corrupted download file. Re-download the firmware file and try a different USB port. Receiver Looping Boot Failed flash or wrong firmware version.
Turn off the power to your Humax F1 Mini using the rear power switch or by unplugging the power adapter.