Mikrotik L2tp Server Setup Full Fix -

This complete setup ensures that your remote clients have secure access to the local MikroTik network. Let me know if:

First, define the range of IP addresses that will be assigned to your VPN clients. Go to > Pool . Click the + icon. Name it l2tp-pool . Set the addresses (e.g., 192.168.80.10-192.168.80.50 ). Phase 2: Configure the PPP Profile

To configure L2TP authentication, navigate to and click on the Authentication tab. Click the + button to create a new authentication configuration. mikrotik l2tp server setup full

Firewall: allow UDP/500, UDP/4500, and protocol 50 (ESP) to the router, but restrict source addresses where possible.

Navigate to > Firewall > Filter Rules tab, click + , and add the following four rules. Ensure these rules are placed above any drop rules in your firewall list. 1. Allow UDP Port 1701 (L2TP traffic) Chain : input Protocol : udp Dst. Port : 1701 Action : accept 2. Allow UDP Port 500 (IPsec IKE) Chain : input Protocol : udp Dst. Port : 500 Action : accept 3. Allow UDP Port 4500 (IPsec NAT-Traversal) Chain : input Protocol : udp Dst. Port : 4500 Action : accept This complete setup ensures that your remote clients

Настройка L2TP сервера в MikroTik - курсы mikrotik training

Setting up an L2TP (Layer 2 Tunneling Protocol) server on a router is a widely used method for providing secure remote access or linking branch offices Click the + icon

I can provide tailored scripts or troubleshooting steps based on your network architecture. Share public link

The IP pool defines the range of private IP addresses that will be assigned to VPN clients when they connect.

This is the core of the VPN configuration.