: The product is acceptable for use in boiler and cooling systems (Category G7) where neither the treated water nor steam contacts edible products in food processing areas. Safety & Hazard Profile
Because Nalco 3DT449 contains phosphonates and azoles, discharging concentrated or untreated product directly into natural water bodies can be toxic to aquatic life (fish, daphnia, and algae).
Immediately flush eyes with gently flowing water for at least 15 minutes, holding eyelids open. Remove contact lenses. Seek immediate medical attention, preferably from an ophthalmologist.
While specific firefighting instructions for NALCO 3DT 449 are not provided in a single section, general guidelines for similar water-based Nalco products indicate that the product itself should not burn unless all water has evaporated by boiling, leaving residual organic matter that may be flammable. Firefighters should use standard protective equipment.
: Do not flush into surface water or sanitary sewer systems. Dispose of in accordance with local and national regulations. nalco 3dt 449 msds
The MSDS for 3D TRASARâ„¢ 3DT449 was dated , with version number 1.7 . Users should verify they are referencing the most current version, as safety data sheets are periodically revised.
While formulations can vary, the active components generally include:
Do not confuse this with standard pool chlorine. 3DT 449 has a unique bromine base that remains more effective at higher pH levels (7.5–9.0) typical of cooling towers.
It holds an NSF International Registration for category G5, meaning it is safe for treating cooling and retort water in and around food processing areas under strict dosage limitations. Understanding the GHS Safety Profile of 3DT449 : The product is acceptable for use in
Stop the leak if possible. Soak up with absorbent material (e.g., sand, vermiculite) and place in suitable containers for disposal.
According to standardized Global Harmonized System (GHS) criteria found in contemporary 3D TRASAR documentation, Nalco 3DT449 contains active, highly acidic, or alkaline properties designed to disrupt mineral scaling. Signal Word: DANGER
Unlike more corrosive industrial water treatments, Nalco 3DT449 is uniquely formulated for lower toxicity and increased worker safety. : Not a hazardous substance or mixture. Signal Word : None. Hazard Statements : None.
It contains specific inhibitors that prevent mineral deposits, such as calcium carbonate and calcium sulfate, from forming on heat transfer surfaces. Corrosion Inhibition: Remove contact lenses
Industrial cooling water systems require robust chemical treatment to prevent scale formation, corrosion, and biological growth. Nalco 3DT449 is a specialized chemical formulation designed by Ecolab/Nalco Water to address these challenges, primarily utilizing their proprietary 3D TRASARâ„¢ technology.
The Nalco 3DT 449 MSDS is a critical document that provides essential information on the safe handling, use, storage, and disposal of this chemical product. By understanding the contents of the MSDS and following safe handling and use guidelines, you can minimize the risks associated with Nalco 3DT 449 and ensure a safe working environment. Always consult the MSDS and follow recommended procedures to handle and use this product responsibly.
When breaking lines, sampling, or swapping chemical totes containing concentrated Nalco 3DT449, operators must wear: