Owon Hds2102s Firmware Update Fix [updated] Now

: Older units use a different chip architecture than newer units manufactured after 2023.

Owon frequently updates internal mainboard revisions. Installing firmware meant for an older or newer revision will brick your device. Go to Menu -> System -> About to note your exact current firmware and hardware version.

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.

: Check Windows Device Manager. If you see a yellow exclamation mark next to the USB device, right-click it, choose "Update Driver," and manually point it to the folder where you extracted the Owon USB drivers. White Screen or Boot Loop After Flashing owon hds2102s firmware update fix

The OWON HDS2102S is a versatile and capable instrument for field and benchtop use. However, its firmware update process is non-trivial and carries risks.

Extract the downloaded zip file. Run the driver installation executable found within the package to ensure your PC recognizes the oscilloscope.

Sometimes the device is simply frozen. Try to force a reset: Remove the 18650 batteries from the back of the unit. : Older units use a different chip architecture

Toggle between Scope, Meter, and Generator modes to confirm the FPGA and DAC systems are operating correctly. If you need help finding files, let me know: Your current hardware/firmware version from the About menu Your Windows OS version The exact error message or symptom you are experiencing

| Symptom | Likely Fix | |--------|-------------| | No "Updating" message | Reformat SD card as FAT32; try a different card (4–8 GB recommended). | | Update freezes halfway | Do not power off for 10 minutes; if still frozen, contact OWON support – manual recovery may require a JTAG or bootloader reflash. | | Device no longer powers on after update | This indicates a "brick." Try holding the power button for 15 seconds to reset. Otherwise, professional re-flashing via serial port is required. |

The HDS2102S uses a simple "drag-and-drop" method for updates by appearing as a removable drive on your PC. Turn on the oscilloscope. Press the button. Go to Menu -> System -> About to

Before your computer can communicate with the oscilloscope, you must install the CH340 or specific Owon USB drivers included in the download package. Connect the powered-on HDS2102S to your PC via USB. Open your computer's .

Fixes the 1-2 second delay when switching auto-range modes.

Issue 2: Screen Blinks or Gets Stuck During Boot (Soft Brick)

Owon uses different microcontrollers and internal board layouts depending on the manufacturing date.

: V4.7.1 reportedly fixes a 2-channel trigger bug and adds RMS measurements. Post-Update Orientation