Phison-mpall-v5.13.0c.rar Updated Jun 2026
Rewrites damaged or missing microcode on the controller chip.
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
If you need help resolving a specific error code or configuring your configuration file, please let me know your and Flash ID Code from your diagnostic report. Share public link
Re-initializes flash memory when the drive registers as empty or unformatted. Phase 1: Diagnostics (Before Extracting the RAR)
If the drive remains write-protected after a successful green flash, you may need to run a low-level clearing tool or use a different version of the firmware designed specifically for your NAND memory brand (Toshiba, Hynix, Micron, etc.). Safety and Disclaimer phison-mpall-v5.13.0c.rar
Save the configuration, which will write the data to MP.ini or a custom filename. 4. Execute the Production Flash
Switch from a USB 3.0/3.1 port to a native USB 2.0 port. Avoid using external USB hubs. Failed to clear hardware flag
To fix these deep-seated controller errors, standard formatting tools are useless. You need a mass production tool (MPTool). For flash drives utilizing Phison controllers, is one of the most reliable and widely used official service utilities available.
The status square will progress through light blue tracking phases. Rewrites damaged or missing microcode on the controller chip
: Often named with an "FW" prefix (e.g., FW07V50253TW.BIN ). Usage Warning
Click to lock these settings directly into the MP.ini operational control file. Step 4: Execution Return to the main window grid layout.
The tool cannot communicate with the chip. Ensure you are using a USB 2.0 port. Avoid USB hubs or front-panel ports; plug the drive directly into the motherboard.
Reflashing alters the device at a hardware level. Backup any data beforehand if the drive is intermittently readable, as . Step 1: Configure the INI file If you share with third parties, their policies apply
your USB drive. Always check your controller model using a tool like ChipGenius before proceeding. Do you have a specific error message controller model you are trying to fix with this tool?*****
If you are downloading this file today, exercise extreme caution. Because it is an unofficial RAR archive hosted on third-party sites, it is a prime target for malware injection. Always check the hash and scan the executable before attempting to flash any hardware.
Mass production tools are highly powerful factory-level utilities. Using the wrong configuration or incorrect firmware files can . Furthermore, this production process utilizes low-level formatting which completely destroys all data stored on the drive .
The tool itself is safe when downloaded from reputable hardware forums (e.g., USBDev, FlashBoot.ru). However:
If the drive is detected, click the button located at the bottom left.
| Error Code | Meaning | Solution | |------------|---------|----------| | | Block mismatch | Use a different FC file from the FC_x folder | | Ox1023 | Write protected | Use the "Erase Full Flash" option in Param Editor | | Ox1084 | Bad firmware | Extract fresh BIN files from another working copy | | Ox1102 | Device not responding | Replug drive, restart MPALL, use USB 2.0 port | | 0x1111 | NAND not supported | Try a newer MPALL version (v5.21 or v6.x) |