Point-n-measure Digital Tape W5746 User Manual | Verified

| Parameter | Value | |-----------|-------| | Laser range | 0.5 – 130 ft (0.2 – 40 m) | | Laser accuracy | ± 1/16 in (± 1.5 mm) | | Tape range | 0 – 16 ft (0 – 5 m) | | Tape accuracy | Class II (± 1.2 mm over 5 m) | | Laser class | Class 2, 635 nm, <1 mW | | Battery | 3.7 V Li-ion, 400 mAh | | Auto shut-off | 180 sec (laser) / 300 sec (idle) | | Operating temp | 32°F – 104°F (0°C – 40°C) | | Weight | 8.5 oz (240 g) |

: Avoid aiming at highly reflective or shiny surfaces , as this can cause the signal to bounce and lead to incorrect readings. Ensure the device remains still while the measurement is being captured.

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. Point-N-Measure Digital Tape W5746 User Manual

Close the compartment. If the LCD screen doesn't turn on, ensure the polarity (+/-) is correct. Powering On/Off Press the READ or ON button once.

If you can tell me you are having, or if you need help with another tool , I'd be happy to help. For now, checking the battery is a great first step! | Parameter | Value | |-----------|-------| | Laser

Align the device toward the targeted target wall or object. Ensure there are no physical obstacles blocking the path between the device sensor and the target.

The device uses one 9V battery . Open the battery compartment on the back of the unit and insert the battery, ensuring the polarity is correct. This link or copies made by others cannot be deleted

For further assistance or warranty claims regarding the Point-N-Measure W5746, please contact your local distributor or the customer service department listed on your original packaging. Share public link

Since I cannot physically hand you a piece of paper, I have reconstructed the for this specific tool below. This guide covers the features, instructions, and troubleshooting for the Point-N-Measure tape measure.

A weak 9V battery can result in inaccurate readings or a flickering laser. 5. Troubleshooting (W5746 Specifics)