Rok Power Washer Instructions New ((better))

Before plugging anything in or adding fuel, lay out all components on a clean, flat surface.

: Switch the unit to the "On" position. For electric models, ensure the GFCI plug is reset if the unit doesn't start immediately [30].

Move the choke lever to the position (left) if the engine is cold. If the engine is already warm, leave it in the RUN position. rok power washer instructions new

: Start with the wand about 2 feet away from the surface and move closer only if needed.

When shifting positions or walking away from the machine, always engage the safety trigger lock on the gun handle to prevent accidental spraying. 4. Understanding Nozzles and Pressure Levels Before plugging anything in or adding fuel, lay

If the unit won't start, check the reset button on the power plug or near the motor.

ROK Power Washer Instructions: The Ultimate Setup and Operation Guide for New Owners Move the choke lever to the position (left)

Firmly squeeze the spray gun trigger with one hand to relieve backpressure while pulling the starter cord with the other.

: Flip the power switch to the "ON" position. The motor will run briefly to pressurize the system and then stop. This "Total Stop System" (TSS) means the motor only runs when you squeeze the trigger.

Thread the spray lance (extension wand) into the front threads of the trigger gun. Twist clockwise until tight.

Interchangeable spray nozzles (or an adjustable vario nozzle) Water inlet adapter (usually with a built-in mesh filter) Detergent bottle or built-in tank attachment Step-by-Step Assembly