Thyssenkrupp Levant Stair Lift Installation Manual Full [portable] Jun 2026

Use the armrest joystick to drive the lift up and down the track.

Generally required every 3–5 years depending on usage. Safety Warning

Immediately reinstall the mechanical end-stop plates and tighten the safety bolts at both ends of the rail. Step 2: Install the Seat Assembly Place the seat post into the top receiver of the carriage. thyssenkrupp levant stair lift installation manual full

Top and bottom charging strips, trailing cable (if applicable), and the transformer plug.

Bolt the adjustable seat post onto the top of the carriage. Adjust the height according to the primary user's comfort requirements before tightening. Use the armrest joystick to drive the lift

Carefully align the carriage rollers and the drive pinion gear with the rail tracks and gear rack.

Slide the alignment splice bars or joint pins into the channels of the first rail section. Step 2: Install the Seat Assembly Place the

The ThyssenKrupp Levant operates on a 24V DC battery system, which is continuously charged by a standard wall transformer. Step 6.1: Connecting Internal Batteries

The system comprises a robust aluminum rail, a drive unit with a comfortable seat, a foldable footrest, and a motorized system that moves the user along the rail. The installation process is designed to be straightforward for a qualified professional and requires minimal structural modifications to your home.

Minimum 24 inches (610 mm) Max track angle: 53 degrees 2. Unboxing and Component Identification

Immediately bolt the mechanical end stop blocks back onto both ends of the rail. Warning: Operating the lift without end stops can cause the carriage to drive off the track. Step 5: Mounting the Seat Assembly