If you decide to move to the newer hardware, you will unlock a host of significant improvements. Here is what version 1.0.13.1 brings to the table:
The Linux system is generally faster and more responsive than the old Windows CE interface.
Use a USB drive, formatted to FAT32, with a capacity of 4GB to 16GB.
After upgrading, you may need to re-activate the rear camera in the system menu (often accessible via Micom Config). Need Help Upgrading? If you can tell me: Your exact vehicle model and year If you have a rearview camera upgrade medianav 9.1.3 to 1.0.13.1
Start your car's engine to ensure a constant power supply. If the unit loses power during the update, it can become "bricked" or permanently stuck on the logo screen. Insert the USB drive. The system will detect the update and ask if you wish to proceed. Tap "Update." 4. The Waiting Process
After a few seconds, a prompt will appear on the screen stating that an update file is available, showing an update from 9.1.3 to the modified 1.0.13.1 environment. Tap (or Upgrade ). Step 4: Wait for completion
Firmware 9.1.3 runs on a Linux/WinCE hybrid architecture with low RAM. Firmware 1.0.13.1 runs on a completely different Linux-based hardware platform (MediaNav Evolution 3 / ULC4). If you decide to move to the newer
Many users install community-made "skins" (like MediaSkin) onto 9.1.3 to add video players and custom navigation, though this carries a risk of "bricking" the device. 3. Aftermarket Alternatives
Despite these challenges, the feedback from customers was overwhelmingly positive. Many praised the new features and improved performance of the upgraded Medianav system. The team at TechDrive was thrilled to see their hard work paying off, and they continued to work tirelessly to ensure that the upgrade process was smooth and hassle-free for all customers.
Whether you want to gain functionality If you have a backup camera installed After upgrading, you may need to re-activate the
Access the if needed to enable specific features like a reverse camera or to toggle the "WAKE" setting if the unit does not start automatically with the car. Managing Your Current 9.1.3 System
Reduced likelihood of crashes or freezing during navigation.
Disconnect the wiring loom and antenna cables from the back. : Connect the existing wiring to the new v2 unit.
The toolbox should automatically notify you of an available update (moving from 9.x to 1.0.x).