Usb Device Id Vid 1e3d Pid 198a Top [exclusive] Jun 2026

Often found on drives produced from around 2019 onward, the CBM2199E is commonly paired with TLC (Triple-Level Cell) NAND flash. These drives are notorious for exhibiting the "No Media" error after a logical failure. In many cases, the flash ID code remains readable by tools like ChipGenius—for instance, a code like 2CC30832EA30 can point to a specific Micron TLC chip. This indicates that the memory chip itself is likely fine; the problem is purely with the controller's logic. A user on the Technopat forums described this exact scenario with a 64GB drive that suddenly showed as 1GB.

If the drive shows 0 bytes, the firmware is damaged. The firmware tools will likely erase all data on the drive to make it functional again. Conclusion

Chipsbank controllers are frequently found in generic USB drives. If you find that this device reports a very high capacity (e.g., 2TB) at a very low price, it is likely a . These drives use modified firmware to report more space than they actually have, leading to data loss once the true physical limit is reached. Tools like H2testw can verify the actual storage capacity of these devices. usb device id vid 1e3d pid 198a top

If you are dealing with a USB device identified as , you have likely encountered a "No Media" or "0 bytes" error, where your flash drive or portable memory card appears in your device manager but cannot be accessed, formatted, or written to.

This is a very bad sign. FBFBFBFB is an error code indicating the controller cannot communicate with the NAND flash memory chip. This usually means the flash memory is dead, not just corrupted. In this state, the drive is almost certainly beyond repair. Often found on drives produced from around 2019

Zadig is a tool that installs generic WinUSB or libusb drivers.

This data comes from sources like flashboot.ru , usbdev.ru , and the linux-usb.org database. This indicates that the memory chip itself is

If you want to locate the driver manually, it is stored in the \Windows\System32\DriverStore\FileRepository folder.

: In some cases, Device IDs can be used to control access to certain devices or data. For instance, only allowing specific devices (identified by their VID and PID) to access a network or a particular application.

USB devices featuring Vendor ID 1E3D and Product ID 198A are identified as products utilizing Chipsbank Microelectronics controllers, frequently found in generic, budget-friendly flash drives. These devices often use the CBM2199E controller, operate under USB 2.0 speeds, and can be managed using standard Windows mass storage drivers. For detailed identification and technical specifications, visit DeviceHunt USB\VID_1E3D = Chipsbank Microelectronics Co., Ltd