Fast Startup can sometimes interfere with the network card's ability to listen for signals after a shutdown.
AnyDesk is designed primarily for remote desktop access while the operating system is running, but with the right configuration, you can use to turn on a computer that is shut down or in sleep mode. This is a highly requested feature for users who want to access office machines from home without leaving them running 24/7.
Ensure your router isn't blocking magic packets. Advanced: Wake-on-LAN over the Internet
While highly rated for its and energy-saving benefits, the feature is often criticized for its complex setup . wake on lan anydesk hot
: Disable Fast Startup in Windows Power Options to ensure the network card stays active. AnyDesk Settings :
By implementing these steps, you can harness the power of AnyDesk’s WoL feature to ensure your workstations are available on demand, safely, and efficiently. If you'd like, I can:
To implement the AnyDesk Wake on LAN "hot" method, you must enable permissions across three separate layers of your target machine. Fast Startup can sometimes interfere with the network
: Navigate to Advanced, Power Management, or APM Configuration.
is a highly sought-after, trending feature that allows users to remotely power on a sleeping, hibernating, or fully shut down computer from anywhere in the world . Leaving an office or home PC running 24/7 wastes significant energy and introduces hardware fatigue and security vulnerabilities. Configuring AnyDesk Wake on LAN solves this dilemma by ensuring your remote machine remains completely accessible on-demand, while resting safely in a low-power state when not in use.
Here’s how AnyDesk specifically uses WoL: Ensure your router isn't blocking magic packets
When you attempt to connect to an offline machine via AnyDesk, the software searches for . The AnyDesk server instructs that active machine to broadcast the Magic Packet locally, successfully booting up your target device. Step-by-Step Configuration Guide
Wake-on-LAN (WoL) lets you power on a sleeping/off PC remotely by sending a magic packet to its network interface. AnyDesk can be used alongside WoL so you can remotely wake and then connect to a machine that wasn’t previously powered on. This guide covers prerequisites, BIOS/UEFI and OS configuration, router/network considerations, how to send WoL from within AnyDesk and other devices, troubleshooting, security considerations, and example commands.
: Restart your computer and tap F2 , Del , or Esc during boot. Power Settings : Navigate to the "Power" or "Advanced" tab.