Xmtk-9000 User Manual __full__ Jun 2026

| Parameter | Specification | |-----------|---------------| | | 0–400°C (depending on sensor) | | Accuracy | ±0.5% FS ± 1 digit | | Display | 3½ digit 0.5-inch (or 0.8-inch) LED | | Input Types | Thermocouple (K, E, J, S, B, R, N, T), RTD (Pt100, JPt100), voltage (0–5V, 1–5V), current (0–10mA, 4–20mA) | | Sampling Cycle | 0.5 seconds | | Control Output | Relay 250VAC 5A, SSR driver 0–12V, current 0–10mA/4–20mA, voltage 0–5V/1–5V | | Alarm Output | Up to 2 groups, 12 modes, 250VAC 3A | | Power Supply | 220VAC ±10%, 50Hz | | Power Consumption | <10VA | | Panel Cutout | 45×45mm (common for 48×48mm housing) | | Operating Environment | 0–50°C, 35–85%RH, non-corrosive, non-condensing | | Weight | Approx. 0.2–0.5kg |

Press the key once briefly. The lowest digit of the SV display will begin to flash.

Modular slots for additional relay, SSR, or analog outputs. xmtk-9000 user manual

XMTK-9000 User Manual: The Ultimate Guide to Operation, Configuration, and Troubleshooting

Temporarily pauses logic execution to allow changes to sensor scaling factors, alarm thresholds, and network protocols. Modular slots for additional relay, SSR, or analog outputs

I can generate precise wiring schematics, register address maps, or step-by-step programming guidelines based on your answers. Share public link

Setting the "AT" parameter to "1" initiates the auto-tuning process. The controller will cycle three times to determine the optimal PID values for your specific environment. Share public link Setting the "AT" parameter to

Position the XMTK-9000 on a flat, stable surface. Ensure there is at least 10 centimetres of clearance around the ventilation cooling slots to prevent overheating. Keep the unit away from direct sunlight, moisture, and extreme heat sources. Step 2: Cable Integration