Tower Crane Dismantling Method Statement [upd] -

The slewing ring, motor, and gearbox assembly is typically the heaviest single component. Verify that the mobile crane has the rated capacity at the required radius for this specific lift.

: Maintain method statements, SWMS, and inspection records on site and available for review.

With the jib removed, the remaining counterweights and the counter-jib assembly can be dismantled. This section typically contains the hoist machinery and electrical equipment.

Rig and remove the remaining counterweight blocks from the counter-jib structure following the same safety protocols as Step 5.4. Step 5.7: Counter-Jib Dismantling tower crane dismantling method statement

Highly specialized technicians who physically unbolt, unpin, and separate the structural sections of the tower crane. 3. Required Machinery, Tools, and Equipment

Use taglines attached to both ends of the jib to control rotation as the mobile crane slowly lowers the entire jib to the ground. Step 5.4: Counter-Jib Removal Hook the mobile crane to the counter-jib lifting lugs.

The slewing assembly is usually the heaviest single lift in the operation. The slewing ring, motor, and gearbox assembly is

Isolate all non-essential electrical systems, leaving only the slewing and hoist power active if required for balancing.

All non-essential personnel must be evacuated from the footprint of the tower crane and the assist crane's radius.

Safety helmets with chin straps (Type 2 preferred for working at height) Steel-toe safety boots Heavy-duty rigging gloves Safety glasses 7. Emergency and Contingency Plan With the jib removed, the remaining counterweights and

A dismantling method statement devotes 40% of its content to ground operations. Why? Because most injuries occur not at height, but during slinging, unslinging, and transport.

Are there any , such as nearby overhead powerlines, public roads, or adjacent buildings? Share public link